Winchester 1885 Mount Set

This mount set is to mount the 17” or 18” Malcolm Short Telescopic Sight onto a Winchester 1885 Low and High wall.

If you would like to mount the Malcolm 6X Two Tone Rifle Telescope or the Malcolm 8X Sniper, you will need to use the W1885MT-C.

This mounting kit is specifically designed for Miroku manufactured predrilled 1885 rifles. The set includes both the front and rear mounts. There is no drilling and tapping required for Miroku manufactured Winchester 1885 rifles.

W1885 Mounting Instructions [download]
Scope Block Cut

Customer Reviews

Based on 7 reviews
71%
(5)
0%
(0)
0%
(0)
14%
(1)
14%
(1)
G
George Damron
Awesome

They called me on the phone to verify that what I had was going to fit my application. You cannot ask for better customer service

P
Peter Hogle
Mounts for Vintage Scope for 1885 Winchester Rifle (Miroko)

The front mount is too low and the rear mount is too high to zero in light / small caliber bullets. I have a M1885 Winchester (Miroko) in 22 Mag and I can not get the bullet (40grs) down low enough to zero @ 50 yds.

M
Mike Delozier
1885 Uberti Low Wall 45 colt

You can’t mount the block on the on the receiver so I had barrel D&T making the rear block lower I was at the top of adjustment at 100yards for the bullet powder combination I was using if I switched to a lighter load I was out of height and bullet fell 8” short I had a .100 taller block made. All good now plenty of adjustment out to 175 yards with a heavy load 8” plate. Doing my Uberti 1873 now

F
Ferris Jones
Front mount does not fit ring

Had to file about 1/8 inch off the back side of front ring to get the crescent cut to line up with thumb screw. also the dovetail mount is not tall enough. Ring adjustment bottomed out to get 100 yds. Had to make a new mount block. Dissapointing.

M
Mike Delozier
1885 Mount Set

I used the 1885 Mount Set to mount a 6X18 short Malcom scope on my Taylor’s/Uberti Baby Rolling Block worked perfect. Ordering another set for my Low Wall. Quality mounts Talked to Scott twice good advice good service fast shipping.

Customer Reviews

Based on 7 reviews
71%
(5)
0%
(0)
0%
(0)
14%
(1)
14%
(1)
G
George Damron
Awesome

They called me on the phone to verify that what I had was going to fit my application. You cannot ask for better customer service

P
Peter Hogle
Mounts for Vintage Scope for 1885 Winchester Rifle (Miroko)

The front mount is too low and the rear mount is too high to zero in light / small caliber bullets. I have a M1885 Winchester (Miroko) in 22 Mag and I can not get the bullet (40grs) down low enough to zero @ 50 yds.

M
Mike Delozier
1885 Uberti Low Wall 45 colt

You can’t mount the block on the on the receiver so I had barrel D&T making the rear block lower I was at the top of adjustment at 100yards for the bullet powder combination I was using if I switched to a lighter load I was out of height and bullet fell 8” short I had a .100 taller block made. All good now plenty of adjustment out to 175 yards with a heavy load 8” plate. Doing my Uberti 1873 now

F
Ferris Jones
Front mount does not fit ring

Had to file about 1/8 inch off the back side of front ring to get the crescent cut to line up with thumb screw. also the dovetail mount is not tall enough. Ring adjustment bottomed out to get 100 yds. Had to make a new mount block. Dissapointing.

M
Mike Delozier
1885 Mount Set

I used the 1885 Mount Set to mount a 6X18 short Malcom scope on my Taylor’s/Uberti Baby Rolling Block worked perfect. Ordering another set for my Low Wall. Quality mounts Talked to Scott twice good advice good service fast shipping.

Search