This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

Leatherwood Hi-Lux

A few scopes are built to sit much farther away. They have a much longer eye relief than is standard. For this very simple reason, they're called long eye relief scopes. Sometimes, you'll see that written as LER.
  • 5 min read
The barrel is the place where the bullet builds up speed, starts to spin, and gets going on the right path. Once the primer is struck, the powder burns and heats, the reaction speeding up as more powder heats up yet more powder and sets it off too. This expanding mass of hot air and burning propellant shoves the bullet down the barrel, burning more as it goes.
  • 6 min read
In a nutshell; the action is the portion of the rifle that performs the action of firing the round and ejecting the cartridge. The action is the mechanical structure responsible for loading a cartridge into the chamber, firing, and ejecting a cartridge. Let’s just say - this is literally where the action happens. Make all the puns you want.
  • 7 min read
Powder is the stuff that really sends the bullet flying. Once the primer sets off the reaction, powder burns. As the powder burns, the pressure and temperature in the chamber and the barrel skyrocket. The rising temperature and pressure cause more powder to burn, speeding up the process until it completes.
  • 5 min read
Rimfire cases have the priming compound built into the case - specifically, around the inside of the rim. The firing pin of a rimfire rifle hits the rim of the case instead of the center. They do not have a separate priming cap at the middle of the head.
  • 2 min read
The primer is the little swab of explosive material that sets off the rest of the propellant. To be more specific - in a centerfire cartridge, the primer is a small metal cap with a tiny amount of explosive compound inside, set into the primer pocket at the base of the case (the case head).
  • 5 min read
Here are common classifications of bullets and what they may be used for. This is a list of some of the more common terms you may come across, though more seem to appear every day. Some bullets are differentiated by shape, some by material.
  • 5 min read
One term you’ll hear thrown around quite often is BC. BC is the Ballistic Coefficient, a rather important number in the world of bullet flight efficiency. A higher BC means a bullet will retain velocity better - have less negative acceleration, less drag from the air resistance - in similar conditions to a low BC bullet.
  • 7 min read
Most bullets are made almost entirely of lead. Lead has been the top choice in bullets for hundreds of years now, and it’s all due to a few simple reasons - it’s very dense, it’s easy to cast, and it’s fairly malleable. 
  • 6 min read
The bullet is the chunk of metal that actually exits the rifle’s muzzle, provided everything works the way it should. Ideally, it’ll be going at a tremendous speed with a good amount of spin. Think of the bullet as a high-speed football. 
  • 5 min read
The rim protrudes around the circumference of the head of the case, and is not technically a separate component of the case. I list it separately here because of the unique functions it provides. It is where the rifle’s extractor grabs the spent case to pull it from the chamber.
  • 3 min read
Cases come in many sizes, but only two general shapes: bottlenecked and straight walled.
  • 2 min read

Search